rganization

Altronix MAXIMAL11D 12vdc@8a/24vdc@6a 16 ptcout

Special Price: $546.03
SKU: AX-MAX11D
LimitedAvailability
MPN: MAXIMAL11D

  • Input:

  • 115VAC 60Hz, 7.0 amp input.
  • Power supply input options:
  • a) Two (2) common power input for either ACM8CB and lock power (factory installed).
  • b) Two (2) isolated power inputs (external power supply is required), (current is determined by the power supply connected, not to exceed a maximum of 10 amp total).
  • Sixteen (16) Access Control System trigger inputs.
  • Input options:
  • a) Sixteen (16) normally open (NO) inputs.
  • b) Sixteen (16) open collector inputs.
  • c) Any combination of the above.

  • Output:

  • 12VDC and/or 24VDC outputs.
  • Maximum output current:

  • Options:

  • A) 12VDC @ 3.5 amp plus 12VDC @ 3.5 amp
  • B) 24VDC @ 2.7 amp plus 24VDC @ 2.7 amp
  • C) 12VDC @ 3.5 amp plus 24VDC @ 2.7 amp
  • Class 2 Rated power limited outputs.
  • Sixteen (16) independently controlled outputs can be Fail-Safe and/or Fail-Secure power outputs.
  • Sixteen (16) auxiliary power outputs (unswitched)
  • (outputs are rated 2 amp).
  • Filtered and electronically regulated outputs (built-in power supply).
  • Thermal and short circuit protection with auto reset.

  • Fuse Ratings:

  • Power Supply input fuse rated @ 3.5 amp/250V.
  • ACM8CB boards main fuse is rated at 10 amp. Output fuses are rated @ 2.5 amp.

  • Features:

  • Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the sixteen (16) outputs.
  • Fire Alarm disconnect input options:
  • a) Normally open (NO) or normally closed (NC) dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.
  • Alarm output relay indicates that FACP input is triggered (form "C" contact rated @ 1 amp 28VDC).

  • Supervision:

  • AC fail supervision (form "C" contacts).
  • - Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
  • Low battery and battery presence supervision (form "C" contact).

  • Battery Backup:

  • Built-in charger for sealed lead acid or gel type batteries.
  • Maximum charge current 0.7 amp per p/s board.
  • Automatic switch over to stand-by battery when AC fails.
  • Zero voltage drop when unit switches over to battery backup (AC failure condition).

  • Visual Indicators:

  • Red LEDs indicate outputs are triggered (relays energized).
  • Green LED indicates FACP disconnect is triggered.
  • AC input and DC output LED indicators.

  • Electrical:

  • Operating temperature: 0 ° C to 49 ° C ambient.
  • BTU/Hr.:
  • - 12VDC: 43 BTU/Hr.
  • - 24VDC: 66.33 BTU/Hr.
  • - 12VDC & 24VDC: 54.66 BTU/Hr.
  • System AC input VA requirement: 805VA.
  • Lifetime Warranty

    Customer Reviews

    (0.00) stars out of 5
    # of Ratings: 0
    (Only registered customers can rate)
    • Payment Methods
    • Powered by AspDotNetStorefront
    © Automationsrouce.com 2024. All Rights Reserved. Powered by AspDotNetStorefront
    Loading...